banner

Products

PP PE POM PS ABS Melt Flow Indexer (MFI)

PP PE POM PS ABS Melt Flow Indexer (MFI)

Machine intrudution XNR400AM melt flow rate meter is based on GB36822000, Test Methods for Determination of ISO1133 ther
SHARE

Description

Basic Info.
Model NO. XNR-400AM
Trademark Xihua
Origin China
Product Description
Machine intrudution
XNR400AM melt flow rate meter is based on GB36822000, Test Methods for Determination of ISO1133 thermoplastic flow properties at high temperature instrument, which uses a microcomputer (MCU) control, Chinese user interface, automatic test results; for polyethylene (PE), polypropylene (PP), polyoxymethylene (POM), polystyrene (PS), ABS plastic, polycarbonate melt flow rate measurement (PC), etc. at a high temperature can be measured MFR value (quality Act)
Main Feature
Measuring range :0.1-400.00g/10min(MFR)
Precision of temperature control:Room temperature - 400°c
Precision of temperature:± 2°c
Precision of timepiece:1s
Load:Full load
Cutting mode:Manual ,by time
Temperature recovery time: less than 4 minutes
Cut material number :1-99
Cut material time interval :10-600 seconds
Holding time:ten thousand hours of continuous work
Cavity die:Tungsten carbide, L 8.000mm±0.025mm, internal diameter Φ2.095mm ±0.005mm
Screw barrel internal diameter:Φ9.550mm ± 0.025mm
Screw barrel length: 152± 0.1mm
Cavity die:Tungsten carbide, L 8.000mm±0.025mm, internal diameter 2.095mm ±0.005mm
Power:0.45KW
Power supply: AC220V±10%,50Hz
Dimension: 400mm * 500mm * 600mm
Weight: 60kg

Machine pictures

CertificateOur team

Our Contact